This website uses cookies to help provide contents in accordance with your preferences. If you accept the use of cookies click OK.


DOWNLOAD DOCUMENTS


Select



Or make a custom search

Quick search

TS_ADEKA KM_121_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
SS_AKTI-VO 201_442_EN.pdf
DS_AMPHIBIA with diaphragm wall_443_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
DS_AMPHIBIA installed before pouring concrete - sealing penetrations_449_EN.pdf
DS_Tanking with PLASTIVO and AMPHIBIA_446_EN.pdf
DS_Raft foundation with piles - AMPHIBIA around pile head_452_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls_454_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls without raft foundation toe_517_EN.pdf
TS_AKTI-VO 201_122_EN.pdf
TS_AKTI-VO BS_457_EN.pdf
SS_AKTI-VO BS_287_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
SS_AMPHIBIA SAFETY_480_EN.pdf
SS_AMPHIBIA SAFETY TAPE BT_476_EN.pdf
DS_AMPHIBIA installed before pouring concrete - sealing penetrations_449_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls_454_EN.pdf
TS_AMPHIBIA 3000_459_EN.pdf
SS_AMPHIBIA SAFETY_480_EN.pdf
SS_AMPHIBIA SAFETY TAPE BT_476_EN.pdf
SS_AMPHIBIA 3000 GRIP_466_EN.pdf
SS_AMPHIBIA GRIP TAPE_483_EN.pdf
SS_AMPHIBIA LAP SEAL_487_EN.pdf
DS_AMPHIBIA with diaphragm wall_443_EN.pdf
DS_Construction joint with AMPHIBIA 3000 GRIP under the slab and PLASTIVO on the foundation walls_516_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
DS_AMPHIBIA installed before pouring concrete - sealing penetrations_449_EN.pdf
DS_Tanking with PLASTIVO and AMPHIBIA_446_EN.pdf
DS_Raft foundation with piles - AMPHIBIA around pile head_452_EN.pdf
DS_Lift pit with screed - AMPHIBIA_514_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls_454_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls without raft foundation toe_517_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
DP_AMPHIBIA 3000 GRIP_Nr 0029_CPR_2020_11_04_435_EN.pdf
TS_AMPHIBIA 3000 GRIP_428_EN.pdf
SS_AQUASCUD 500_438_EN.pdf
TS_AQUASCUD 500_432_EN.pdf
DS_AQUASCUD SYSTEM: sealing of corner_199_EN.pdf
SS_JOIN BT_470_EN.pdf
TS_AQUASCUD JOIN BT_180_EN.pdf
DS_Roof garden - Aquascud SYSTEM_231_EN.pdf
DS_Vehicular roof - AQUASCUD 420_229_EN.pdf
DS_AQUASCUD SYSTEM: sealing of corner_199_EN.pdf
DP_AQUASCUD SYSTEM 420_Nr 0024_CPR_2018_10_09_326_EN.pdf
SS_AQUASCUD 420 Powder component_259_EN.pdf
SS_AQUASCUD 420 Liquid component_409_EN.pdf
DS_Roof garden - Aquascud SYSTEM_231_EN.pdf
DS_Vehicular roof - AQUASCUD 420_229_EN.pdf
DS_AQUASCUD SYSTEM 420 - splitting joint sealing_519_EN.pdf
TS_AQUASCUD SYSTEM 420_188_EN.pdf
DS_AQUASCUD SYSTEM: sealing of corner_199_EN.pdf
DP_AQUASCUD SYSTEM 430_Nr 0031_CPR_2018_10_09_327_EN.pdf
SS_AQUASCUD 430 Powder component_391_EN.pdf
SS_AQUASCUD 430 Liquid component_472_EN.pdf
DS_Roof garden - Aquascud SYSTEM_231_EN.pdf
DS_Vehicular roof - AQUASCUD 420_229_EN.pdf
TS_AQUASCUD SYSTEM 430_110_EN.pdf
DS_AQUASCUD SYSTEM: sealing of corner_199_EN.pdf
TS_AQUASCUD LINE_181_EN.pdf
DS_Roof garden - Aquascud SYSTEM_231_EN.pdf
DS_Vehicular roof - AQUASCUD 420_229_EN.pdf
SS_BI FIX A Component_509_EN.pdf
SS_BI FIX B Component_508_EN.pdf
TS_BI FIX_503_EN.pdf
SS_BI MASTIC_510_EN.pdf
DS_AMPHIBIA with diaphragm wall_443_EN.pdf
DS_AMPHIBIA installed before pouring concrete - sealing penetrations_449_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls_454_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls without raft foundation toe_517_EN.pdf
TS_BI MASTIC_500_EN.pdf
SS_BI MORTAR CONCRETE SEAL_440_EN.pdf
DP_BI MORTAR CONCRETE SEAL_Nr 0028_CPR_2017_03_30_434_EN.pdf
DS_Raft foundation with piles - AMPHIBIA around pile head_452_EN.pdf
TS_BI MORTAR CONCRETE SEAL_431_EN.pdf
TS_BI MORTAR PLASTER SEAL_458_EN.pdf
SS_BI MORTAR PLASTER SEAL_392_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
TS_BI MORTAR RASO SEAL_433_EN.pdf
SS_BI MORTAR RASO SEAL_441_EN.pdf
SS_BI MORTAR SL_393_EN.pdf
TS_BI MORTAR SL_187_EN.pdf
SS_BI BOND B Component_426_EN.pdf
SS_BI BOND A Component_386_EN.pdf
TS_BI BOND_192_EN.pdf
DS_Underground tank - construction joint sealing with PLASTIVO 180 and BI FLEX System_520_EN.pdf
SS_WT 102_418_EN.pdf
TS_BREAK_120_EN.pdf
SS_CALIBRO NHL_404_EN.pdf
TS_CALIBRO NHL_83_EN.pdf
DP_CALIBRO NHL_Nr 0014_CPR_2017_03_30_334_EN.pdf
DS_Rising dampness - CALIBRO SYSTEM without skirting_224_EN.pdf
TS_CALIBRO PLUS EVAPORATION_96_EN.pdf
SS_CALIBRO P.E. Intonaco_395_EN.pdf
SS_CALIBRO RINZAFFO_394_EN.pdf
DP_CALIBRO PLUS EVAPORATION_Nr 0012_CPR_2017_03_30_335_EN.pdf
DS_Rising dampness - CALIBRO SYSTEM without skirting_224_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
SS_CP0_416_EN.pdf
DP_CP0_Nr 0026_CPR_2015_05_05_336_EN.pdf
TS_CP0_185_EN.pdf
TS_CP1_128_EN.pdf
DP_CP1_Nr 0009_CPR_2020_02_28_337_EN.pdf
SS_CP1 Liquid component_410_EN.pdf
SS_CP1 Powder component_405_EN.pdf
TS_CRYSTAL_471_EN.pdf
SS_CRYSTAL_474_EN.pdf
SS_CRYSTAL POOL_467_EN.pdf
TS_CRYSTAL POOL_456_EN.pdf
DP_FIBRO 20_Nr 0027_CPR_2015_05_14_339_EN.pdf
TS_FIBRO 20_186_EN.pdf
SS_FIBRO 20_397_EN.pdf
DP_FIBRO HFR_Nr 0033_CPR_2020_04_15_496_EN.pdf
TS_FIBRO HFR - HIGH FRACTURE RESISTANCE_502_EN.pdf
SS_FIBRO HFR Liquid component_507_EN.pdf
SS_FIBRO HFR Powder component_506_EN.pdf
SS_FIBROSTEEL_504_EN.pdf
TS_FIBROMIX 40_92_EN.pdf
SS_FIBROMIX 40_398_EN.pdf
DP_FIBROMIX 40_Nr 0005_CPR_2017_04_05_340_EN.pdf
SS_FLEXOMIX 30_399_EN.pdf
DP_FLEXOMIX 30_Nr 0007_CPR_2017_04_05_342_EN.pdf
TS_FLEXOMIX 30_91_EN.pdf
TS_FLEXONET_179_EN.pdf
TS_FLOWMIX 70_95_EN.pdf
SS_FLOWMIX 70_400_EN.pdf
DP_FLOWMIX 70_Nr 0008_CPR_2017_04_05_344_EN.pdf
DS_Raft foundation with piles - AMPHIBIA around pile head_452_EN.pdf
DS_AQUASCUD SYSTEM: sealing of corner_199_EN.pdf
SS_GARVO_420_EN.pdf
TS_GARVO 3 e 5_124_EN.pdf
DS_Roof garden - Aquascud SYSTEM_231_EN.pdf
DS_Vehicular roof - AQUASCUD 420_229_EN.pdf
DS_AQUASCUD SYSTEM 420 - splitting joint sealing_519_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
TS_I-PLUG_204_EN.pdf
SS_I-PLUG_439_EN.pdf
SS_JOINT PANEL_427_EN.pdf
TS_JOINT PANEL Type B_291_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
TS_JOINT PANEL Type R_501_EN.pdf
SS_PAINT AIR_422_EN.pdf
TS_PAINT AIR_116_EN.pdf
DS_Rising dampness - CALIBRO SYSTEM without skirting_224_EN.pdf
TS_PAINT PROTECTION_117_EN.pdf
DP_PAINT PROTECTION_Nr 0030_CPR_2018_07_25_479_EN.pdf
SS_PAINT PROTECTION_481_EN.pdf
SS_PLASTIVO 180 Powder component_388_EN.pdf
DP_PLASTIVO 180_Nr 0001_CPR_2017_04_05_353_EN.pdf
DP_PLASTIVO 180_Nr 0022_CPR_2017_07_20_382_EN.pdf
TS_PLASTIVO 180_194_EN.pdf
DS_Construction joint with AMPHIBIA 3000 GRIP under the slab and PLASTIVO on the foundation walls_516_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
DS_Tanking with PLASTIVO and AMPHIBIA_446_EN.pdf
DS_Underground tank - construction joint sealing with PLASTIVO 180 and BI FLEX System_520_EN.pdf
DS_Ramp with AMPHIBIA with ADEKA KM 20.20 and JOINT PANEL Type R_521_EN.pdf
SS_PLASTIVO 180 Liquid component_460_EN.pdf
SS_PLASTIVO 250 Liquid component_413_EN.pdf
DP_PLASTIVO 250_Nr 0003_CPR_2019_05_07_354_EN.pdf
SS_PLASTIVO 250 Powder component_389_EN.pdf
TS_PLASTIVO 250_109_EN.pdf
DP_PLASTIVO 250_Nr 0023_CPR_2020_01_15_383_EN.pdf
DS_Construction joint with AMPHIBIA 3000 GRIP under the slab and PLASTIVO on the foundation walls_516_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
DS_Tanking with PLASTIVO and AMPHIBIA_446_EN.pdf
SS_PROCLEAN_423_EN.pdf
TS_PROCLEAN_190_EN.pdf
TS_PROFIX 20_111_EN.pdf
SS_PROFIX 20_414_EN.pdf
TS_PROFIX 30_112_EN.pdf
SS_PROFIX 30_415_EN.pdf
SS_PROFIX 40_421_EN.pdf
TS_PROFIX 40_189_EN.pdf
SS_PROFIX 60 A Component_321_EN.pdf
TS_PROFIX 60_113_EN.pdf
SS_PROFIX 60 B Component_425_EN.pdf
SS_REPOSOL A Component_387_EN.pdf
SS_REPOSOL B Component_429_EN.pdf
TS_REPOSOL_127_EN.pdf
TS_REVOMAT_191_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
TS_SANOFER_90_EN.pdf
DP_SANOFER_Nr 0013_CPR_2017_04_05_364_EN.pdf
SS_SANOFER_402_EN.pdf
TS_SISTEMA BI FLEX_123_EN.pdf
SS_BI FLEX_270_EN.pdf
DS_Underground tank - construction joint sealing with PLASTIVO 180 and BI FLEX System_520_EN.pdf
SS_SPIDY 15_403_EN.pdf
TS_SPIDY 15_102_EN.pdf
DS_Construction joint with AMPHIBIA 3000 GRIP under the slab and PLASTIVO on the foundation walls_516_EN.pdf
TS_TAP 3_101_EN.pdf
SS_TAP 3_396_EN.pdf
TS_TRIPLEZERO_97_EN.pdf
SS_TRIPLEZERO_468_EN.pdf
DS_Rising dampness - CALIBRO SYSTEM without skirting_224_EN.pdf
TS_TRIPLEZERO-T_98_EN.pdf
SS_TRIPLEZERO-T_469_EN.pdf
TS_VOLGRIP HP - High Performance_104_EN.pdf
SS_VOLGRIP_417_EN.pdf
DP_VOLGRIP HP_Nr 0021_CPR_2017_04_05_376_EN.pdf
TS_VOLGRIP LH - Light_103_EN.pdf
SS_VOLGRIP_417_EN.pdf
DP_VOLGRIP LH_Nr 0020_CPR_2017_04_05_377_EN.pdf
TS_VOL-TEC_119_EN.pdf
SS_WT 102_418_EN.pdf
TS_WT 102_118_EN.pdf
DS_AMPHIBIA with diaphragm wall_443_EN.pdf
DS_Construction joint with AMPHIBIA 3000 GRIP under the slab and PLASTIVO on the foundation walls_516_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
DS_Tanking with PLASTIVO and AMPHIBIA_446_EN.pdf
DS_Raft foundation with piles - AMPHIBIA around pile head_452_EN.pdf
DS_Lift pit with screed - AMPHIBIA_514_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls_454_EN.pdf
DS_Connection between AMPHIBIA under the raft foundation and AMPHIBIA installed vertically on the internal side of formworks before casting the walls without raft foundation toe_517_EN.pdf
SS_X-LIME_407_EN.pdf
TS_X-LIME_89_EN.pdf
DS_Rising dampness - CALIBRO SYSTEM without skirting_224_EN.pdf
DS_Tanking with BI MORTAR PLASTER SEAL, PLASTIVO and AMPHIBIA_518_EN.pdf
TS_XNET_499_EN.pdf
SS_XNET_505_EN.pdf
TS_X-RAPID BIANCO_88_EN.pdf
DP_X-RAPID_Nr 0015_CPR_2017_04_05_384_EN.pdf
SS_X-RAPID Bianco_408_EN.pdf


Case History